MATCH Moving Lights

• • Matchbox 1 has two Source Four 50 fixtures with I-cue moving mirrors and auto irises, and two Clay Paky Alpha Spot HPE 700s. These fixtures should not be moved from their rep positions. 

  • Matchbox 2, 3 and 4 each have High End System Solaframe 750 moving lights as part of the rep light plot.  The movers in Matchbox 2 and 4 may not be moved from their rep position.  Those rooms have rep focus palettes and presets.  Matchbox 3 movers may only be moved by approved MATCH technicians. Please coordinate scheduling MATCH technicians with Director of Production.

  • Tech data sheet on the moving lights is included below. 

  • Mover power is patched in to a relay that should come on when the console comes on.  It is one of the relay dimmers included in the parked addresses.  If the mover power does not come on, verify that the parked addresses are set correctly.  Macro 1 will re-park the appropriate addresses in the park. 

  • Programming with movers generally requires the lighting console to be in "tracking" mode, but ultimately it is up to the individual programmer.  Verify the mode that the console is in before starting your show file. 

  • The movers have rep gobo selections.  Gobos in Matchbox 2 or 3 may only changed by approved MATCH technician.  The gobos in Matchbox 4 may not be changed with the exception of the 1 MST gobo.

  • Custom gobos for the moving lights should have an O.D. of 30mm and an image area of 25mm.

  • When placing glass gobos with a black finish, reflective side goes toward the source, black coating goes away.  Steel gobos, if there is a coating, do not matter, and can go either direction. Each in a system should however be set the same direction. 

Matchbox 1 gobos

Matchbox 2 and 3 gobos

Matchbox 4 gobos

 (MST Choice by default is the "Organic" gobo indicated above). Main Street Theater has the option to change that gobo if desired. Otherwise, it will be the same as the other theaters.